Candle Z Probe Not Working. Slow 2nd probe @ 10mm/s. However, i send the m340 p0 s700 or m340 p0 s1500.

Probe connection Upgrades Inventables Community Forum from discuss.inventables.com

Both settings are in settings. Safe home (safe position commands:) The next two buttons are zero xy and zero z, pressing these will set your work coordinates to where your spindle is currently.

Must Be Lager Than Probe Thickness.

Cnc’s use a cartesian coordinate system, where any location can be pinpointed with any combination of three numbers, representing the x, y and z axis. The z probe can be connected between pin28 and gnd. Unfold all fold all more options , , , , , new post.

Haldorlonningdal March 22, 2019, 12:29Pm #8.

Slow 2nd probe @ 10mm/s. When i use g31 to probe the job surface everything seems to work correctly till it ends then when asked to return to g53 z0 it moves towards the table. Both settings are in settings.

Depending On The Code There, You Need To Add Something Like A G92 Zxxx; (Xxx Is The Mm Value) And If Want Some Rectraction After It:

Safe home (safe position commands:) Zretract = 30.0 'init z retract height in mm. This is my first test in candle cnc.

I'm Trying To Find When I Can Enter The 0.025 Measurement.

The next two buttons are zero xy and zero z, pressing these will set your work coordinates to where your spindle is currently. I have a cnc engraver and using candle 1.1.7. This does a fast and then a slow probe, adjusting for probe thickness, then moves up to z.

The Z Axis Should Start To Slowly Move Downward.

For any user of a cnc, to successfully operate your machine. To configure candle for the use of your z probe, you do not need your cnc to be connected to the computer. Just open candle, click the service toolbar and select settings.

Candle Z Probe Not Working. Slow 2nd probe @ 10mm/s. However, i send the m340 p0 s700 or m340 p0 s1500.

Probe connection Upgrades Inventables Community Forum from discuss.inventables.com

Both settings are in settings. Safe home (safe position commands:) The next two buttons are zero xy and zero z, pressing these will set your work coordinates to where your spindle is currently.

Must Be Lager Than Probe Thickness.

Cnc’s use a cartesian coordinate system, where any location can be pinpointed with any combination of three numbers, representing the x, y and z axis. The z probe can be connected between pin28 and gnd. Unfold all fold all more options , , , , , new post.

Haldorlonningdal March 22, 2019, 12:29Pm #8.

Slow 2nd probe @ 10mm/s. When i use g31 to probe the job surface everything seems to work correctly till it ends then when asked to return to g53 z0 it moves towards the table. Both settings are in settings.

Depending On The Code There, You Need To Add Something Like A G92 Zxxx; (Xxx Is The Mm Value) And If Want Some Rectraction After It:

Safe home (safe position commands:) Zretract = 30.0 'init z retract height in mm. This is my first test in candle cnc.

I'm Trying To Find When I Can Enter The 0.025 Measurement.

The next two buttons are zero xy and zero z, pressing these will set your work coordinates to where your spindle is currently. I have a cnc engraver and using candle 1.1.7. This does a fast and then a slow probe, adjusting for probe thickness, then moves up to z.

The Z Axis Should Start To Slowly Move Downward.

For any user of a cnc, to successfully operate your machine. To configure candle for the use of your z probe, you do not need your cnc to be connected to the computer. Just open candle, click the service toolbar and select settings.